Evangelina Belia Ph.D. and John B. Copp Ph.D., the principals of Primodal Inc. are wastewater treatment process modelling specialists with over 40 years of experience.
Evangelina Belia, Ph.D. – has over 20 years experience in the wastewater treatment industry. Since the completion of her doctorate, Dr. Belia has specialised in the construction and commissioning of treatment facilities as well as mathematical modelling. As the lead process commissioning engineer for two PFI schemes at Inverness and Fort William in the north of Scotland, Dr. Belia gained design and construction experience. As head of the Process Modelling Department she successfully developed the modelling capabilities of Bechtel Water. While working with Hydromantis, Dr. Belia led the commissioning at the Niagara Falls Water Pollution Control Plant during the Phase 2 upgrades and she was a principal engineer in the Regional Municipality of Waterloo Biosolids Master Plan.. More recently she had been managing a number of industrial and municipal wastewater modelling projects in the US, Canada and Europe. Dr Belia is currently the Principal Investigator for the IWA Design and Uncertainty Task Group (website) which has developed protocols that allows forthe incorporation of uncertainty analysis in wastewater treatment models with an aim to better understand the uncertainty in model-based predictive process behaviour.
John B. Copp, Ph.D. – has over 20 years experience in wastewater treatment process modelling and experimentation including 2 years of experience in The Netherlands at Wageningen University and Research Centre as part of an IWA Task Group research team investigating control of wastewater treatment plants and 3 months at Pusan National University in South Korea investigating on-line model-based control. Dr. Copp’s process simulation experience is diverse and he has co-authored 3 books on the subject of modelling and the development of a simulation-based protocol for evaluating wastewater treatment control strategies. While with Hydromantis, John was responsible for new model development and numerous applied treatment process modelling projects in Mexico, the United Kingdom and the US. Recent modelling experiences include the calibration of numerous nutrient removal wastewater treatment models for a UK water company and the development of a customised operator training tool for a US-based consulting firm. In addition to his applied work, Dr. Copp is active in research projects abroad including being an active member of an International Water Association (IWA) Task Group on control strategy evaluation benchmarking and a project that is attempting to develop a system for design that incorporates dynamic modelling with construction cost estimates. Formerly, Dr Copp led the new product development team at Hydromantis during which time he directed the development of a new process simulator as well as anaerobic digestion and activated sludge models for SimuWorks, CapdetWorks and GPS-X.
September and October will be busy for Primodal as they will be attending both WEFTEC in New Orleans and IWA’s World Water Congress in Brisbane, Australia. Drs Belia and Copp will speak and facilitate workshops at WEFTEC and Dr Copp willl teach a Good Modelling Practice course in Brisbane on October 7 & 8 before the World Water Congress begins.
In July, Dr Copp along with Diego Rosso, Leiv Rieger, Jose Jiminez and others traveled to Denver where they presented at a workshop on the state-of-the-art in wastewater treatment modelling. The workshop included an introduction to metabolic modelling and a discussion surrounding the applicability of these new models from a practitioners point of view. The workshop was well attended and provided a forum for a lively discussion on the academic vs practical application of models and model research.
In May, Dr Belia presented at WEF’s local Michigan conference (MWEA) on the exciting work that Primodal is doing in Grand Rapids on model-based control. Partnering with InCTRL Solutions and ifak (a German automation institute) in this multi-year project, Primodal has successfully debugged several aspects of the treatment process and begun the implementation and integration of the control system. So far, this success has translated into significant real electricity cost savings and an assessment of the savings to be expected from time-of-day control of industrial waste introduction. Work on the project continues with completion later this year or early next.
WWTmod 2016 was a huge success. WWTmod is the premier wastewater treatment modelling conference on the planet. Held every two years, this limited enrollment conference brings together modelling experts from around the world to discuss the latest in modelling knowledge. This time around, Dr Belia was the organiser and co-Chair of the event which was held in France in April 2016. In addition to organising this exciting programme, Primodal led various forums and workshops during the event.
Dr Copp once again organised a WEF webcast on modelling. This webcast, on February 3rd, 2016 featured 4 speakers (Lorenzo Benedetti, Celine Vaneeckhaute, Oliver Schraa and Dr Belia) who discussed the latest in modelling applications including talks on probabilistic design, aeration energy modelling, nutrient recovery modelling and integrated whole catchment modelling. Be on the lookout for Modelling 401 in 2017, it’s free for WEF members.
It’s been a busy fall for Primodal staff. In September, Primodal traveled to Chicago for WEF’s annual conference where Dr Copp was elected as the Vice-Chair of the Modelling Experts Group of the Americas (MEGA) sub-committee and Dr Belia presented at several workshops and meetings on various modelling topics. In November, Dr Copp travelled to the UK where he gave a course on modelling for design and risk management and in December the organisers of the China-Canada Bilateral Forum on Wastewater Treatment will fly Dr Copp to China to give a presentation on North American modelling practice.
Dr Belia is excited to be the keynote speaker at WaterMatex 2015 in the Gold Coast, Queensland, Australia (http://www.awmc.uq.edu.au/conf/speakers).
October was an exciting month for research activities as WE&T published their latest issue with an article written by Dr Copp on a new glycerin-based biokinetic model and IWA published their Scientific and Technical Report #23 ‘Benchmarking of Control Strategies for Wastewater Treatment Plants’ which was edited by Dr Copp.
Dr Belia traveled to East Lansing Michigan to present at the Sustainable Energy Seminar on modelling as a tool for energy analyses.
And ULaval student Celine Vaneeckhaute who is financially supported by Primodal was awarded the CAWQ Philip H. Jones Award. Congratulations to Celine!
In September, Primodal travelled to Lisbon (Portugal) to take part in the IWA World Water Congress. Dr Copp lectured during the ‘Good Modeling Practice’ pre-conference course and celebrated the publishing of IWA’s Scientific and Technical Report #23 ‘Benchmarking of Control Strategies for Wastewater Treatment Plants’ at the‘Simulation Benchmark’ workshop.
In September, Primodal also travelled to New Orleans (in a round about way by planes trains and automobiles) to take part in WEFTEC2014. Dr Copp and Dr Belia both be facilitated at WEFTEC modeling workshops. Primodal also participated in the Modeling Expert Group of the Americas (MEGA) and the Municipal Wastewater Treatment Design Committee annual meetings.
In May, Dr Copp traveled to Cincinnati to the 9th National Monitoring Conference and presented a podium presentation on Primodal’s real-time data quality analysis tools that have been designed to work with in situ data collection sensors and minimise the amount of post-processing effort required to clean up the sensor data.
Dr Copp also Chaired a WEF-sponsored webcast ‘Modeling 101 – Introduction to Modeling’ that was broadcast live to an audience estimated at 1000 participants. Modeling 201, is currently being planned for the fall.
In January, Primodal partnered with Environmental Operating Solutions to write a article for WE&T on a novel approach to modeling MicroC degradation in a wastewater treatment plant. Accepted for publication, the article will appear in the October 2014 issue, just in time for WEFTEC.
In October, Primodal traveled to Chicago to take part in WEFTEC2013. Dr Copp made two presentations during the ‘Modeling the Right Way – Incorporate Good Modeling Practices Into Your Work!’ workshop and co-authored a podium presentation paper on the development of a new model for simulating the impact of supplemental carbon (glycerin) addition for BNR. Dr Belia participated in the same workshop, chaired a technical session and gave a presentation at the Municipal Wastewater Treatment Design Committee annual meeting.
A paper on the Benchmark Simulation Models (BSMs) co-authored by Dr Copp will be presented at the 2013 Instrumentation, Control and Automation (ICA) conference in Narbonne, France.
Primodal staff traveled to Vancouver and attended the 2013 WEF/IWA Nutrient Removal and Recovery conference. Dr Copp was an invited speaker and presented on high quality monitoring of water systems at the MacWater (McMaster University) symposium of emerging technologies.
Dr Copp will present ‘High quality monitoring of water systems using in situ automatic measurement stations’ at the 48th CENTRAL Canadian Symposium on Water Quality Research in Hamilton, ON, Canada
Primodal staff attended the WEF Mid-Year Meeting in Chicago, USA. Dr Belia attended the Municipal Wastewater Treatment Design Committee meeting and took part in several committee meetings involving WEF and WERF.
In September, Primodal was at WEFTEC in New Orleans. Dr Copp presented a paper on the modeling and operation of a full-scale RAS fermentation reactor, and Dr Belia presented a paper on modelling uncertainty. Both principals were active in various WEF committee meetings throughout the week.
In May, Primodal was contracted by IWA to edit the Good Modelling Practice Scientific and Technical Report due to be published in late 2012. Primodal was also involved in writing two chapters of the upcoming Water Environment Federation’s MOP 31 which is a Manual of Practice dedicated to the modelling of wastewater treatment facilities.
In April, Primodal traveled to Ottawa to participate in the Annual WEAO conference and Portland Oregon to participate in the National Water Quality Monitoring Council’s (NWQMC) 8th National Monitoring Conference – Water: One Resource – Shared Effort – Common Future to be held in Portland, Oregon from April 30 – May 4, 2012.
Primodal presented at the IWA Regional Conference on Wastewater Purification & Reuse, Heraklion, Crete, Greece, March 28 – 30, 2012. Paper: Modeling The Dan Region Wastewater Treatment and Reclamation Project. Belia E., Kraitzer T., Icekson-Tal N. and SelaY. In addition, Primodal was invited to the 2012 Ohio Business Matchmaker at Wright State University Nutter Center in Dayton, Ohio on March 20 and 21to build on their success working with the City of Cincinnati and meet other neighboring municipalities and interested parties.
Primodal staff attended the 3rd bienniel WWTMOD modelling seminar in Mont Sainte Anne, Quebec, Canada where a paper on influent characterisation co-authored by Dr Copp was presented. Paper: Rethinking Wastewater Characterization Methods –
A Position Paper. Choubert J-M, Rieger L.,Shaw A., Copp J.B., Sperandio M., Soerensen K., Rönner-Holm S., Morgenroth E., Melcer H. and Gillot S. At the same conference, Dr Belia chaired the Good Modelling Practice technical session, was a panel member for the ‘Use of Models: Practice versus Academia’ group discussion and was elected to the posoition of co-Chair for the 2016 WWTMod modelling seminar by her peers.
Primodal staff attended the WEF Mid-Year Meeting in New Orleans, USA. Dr Copp attended the Municipal Wastewater Treatment Design Committee meeting and took part in the Supplementary Carbon Task Force meeting where he has been asked to take the lead on the development of a white paper on modelling supplementary carbon addition for nutrient removal.
Primodal travelled to the UK and continental Europe in separate trips to attend project meetings and teach an exclusive modelling course (using WEST) for a French client at their facility.
Primodal staff attended and presented at WEFTEC 2011 in Los Angeles, California, USA. Dr Copp co-chaired Workshop 203: Using a Process Model for Plant Upgrades: Modeling 201. Dr Belia chaired Session 82, Process Modeling as an Operational Tool and co-chaired Session 83, Activated Sludge Process Operation and Foam Control. Both Drs Copp and Belia attended several committee meetings while in Los Angeles including a DOUT information session, a MEGA sub-committee meeting and the Municipal Wastewater Treatment Design Committee meeting. Dr Belia is also a member of the WEF Plant Operations & Maintenance Committee and participated in their meeting as well.
Dr. Belial travelled to Budapest where she chaired a workshop entitled ‘How close to your permit do you design or operate your plant? Effluent regulations, sampling strategies and risk’, 11th IWA Specialized Conference “Design, Operation and Economics of Large Waste Water Treatment Plants”, Budapest, Hungary, 06 September 2011.
Dr Copp travelled to the eastern seaboard to teach a dedicated modelling course on the use of BioWin and GPS-X to a client using both software packages.
Dr. Copp traveled to St. John’s Newfoundland to present a paper on real-time data quality evaluation inside the RSM30 using the PrecisionNow data evaluation module plug-in.
Dr Copp presented ‘Capital Cost Savings Through Model-Based Design to Optimize Assets’ at the WEAO Whole WWTP Modeling: Overview. Tools & Future Needs seminar in Toronto on
June 23, 2011
Dr. Belia will travel to Europe to attend a DOUT Task Group meeting aimed at finalising the Scientific and Technical Report on model uncertainty. The publication date for the STR is set for later this year or early in 2012.